October 3, 2014 Hours spent building to date: 169
After two months of relatively diligent work, all the frames and bulkheads are ready for the strongback. I have a pretty good metal ruler that will have to be retired at this point — some of the numbers are literally wearing off from measuring and checking the measurements so many times.
The problem with Tardis now is that she’s only about 4 feet long, but between now and Thanksgiving, we’ll be taking her up to her full 28 feet.
The shop is pretty much ready to go. A lot of the stuff on the right will move during setup.
The Tardis Project 
Can you tell me mony inveated up to nowand have you done rough estimate of cost for basic hull. thanks Ron Smith KC
LikeLike
I’ll provide a better breakdown in a future post, but I have spent about $7,000 on materials so far, and that should take us through planking. Add at least $2,000 more for glass and I think the basic hull will run just under $10k.
LikeLike